The manual is correct but is missing information for on how to access the regulator (planned update during 2026).
King synthetic (removal of stock necessary):
- Remove the screw in the safety lever, pull the lever out from the stock.
- Remove the two front screws in the stock by the charging inlet.
- Remove the screw by the triggerguard.
- Gently remove the stock from the action
The regulator is now accessible as in the instructions in the manual.
King GRS:
- Remove the trigger guard (one screw),
The regulator is now accessible as in the instructions in the manual(hex-key with ball end is needed).
If only regular hex-key is available you can remove the stock as explained for the synthetic version.